Split HDMI™ 1.3 Video to 2 High-Definition Displays

The 1x2 Splitter for HDMI™ 1.3 allows set-top boxes, DVD players, D-VHS players and other HDTV devices with an HDMI 1.3 output to be connected to two HDTV displays. A greater numbers of displays can be connected by chaining multiple splitters together to create a larger distribution.

How It Works

The 1x2 Splitter for HDMI 1.3 is connected using an HDMI cable from the HDMI 1.3 video source to the input of the 1x2 Splitter. There are two HDMI 1.3 outputs from the Splitter to the HD Displays. Once all connections are made, power-cycle all equipment and you will see beautiful, sharp HDMI 1.3 video on all of your High-Definition displays.

Note:  This product supports BOTH Audio and Video signals.

Display Output 1 is connected to the Primary Display, from which the resolution and device capability information (EDID) is obtained. All other displays on the other outputs must be capable of the same resolution(s) being shown on the Primary Display, or they may not show a picture.

HDMI 1.3 Features:

• Lip-Sync Pass Through
• 225 MHz (up to 12 bit YUV 444 supported @ 1080p)
• Deep Color Supported (XV Color Supported)
• Color Space Conversion Supported
• Dolby TrueHD & DTS Master Supported
• CEC Pass Through

Features:

• Connects two HDMI/DVI displays simultaneously to the same video source
• Allows simultaneous display
• Maintains high resolution video - beautiful, sharp HDTV resolutions up to 1080p, 2k, and computer resolutions up to 1920 x 1200 are easily achieved
• HDMI compliant
• HDCP compliant

Specifications:

• Video Amplifier Bandwidth: 225 MHz
• Input Video Signal: 1.2 Volts p-p
• Input DDC Signal: 5 Volts p-p (TTL)
• Single Link Range: 1080P/1920 x 1200
• HDMI Connector: Type A, 19-pin Female
• Power Consumption: 10 Watts (max.)
• Power Supply: 5V DC
• Dimensions: 10.25"W x 1"H x 4.25"D
• Shipping Weight: 4 lbs.

Package Includes:

• One Gefen 1:2 Splitter for HDMI 1.3
• One 5V DC Power Supply
• One 6-ft cable
• User's Manual